Using DC To AC Power Inverter In The Touring Bus

Time：[2018-7-29]     Views：1649

By using a DC 12 volt or 24 volt to AC 220 volt or 110 volt power inverter in a touring bus,you can install several different electronics to enhance the touring experience.Many mobile touring buses are now setting up television displays and audio speakers.By using a free standing battery or a bank of batteries you can offer power on the go to your clients.

Some bus tours can be full day tours and now by using a DC to AC power inverter,AC outlets can be offered as well to charge laptops,camera batteries and cellphones as well.If you are setting up a 12 volt DC to 220 volt or 110 volt AC power inverter directly to 12 volt battery source of the bus you should set up the power inverter as close to the battery as possible and then run extensions throughout the bus.

If you plan on using the DC to AC power inverter for several hours daily you should add additional battery power.Make sure all additional batteries are connected in parallel to retain the same voltage.A parallel system is set up positive to positive and negative to negative terminal connection to retain the voltage.